use code LOCKIT50 off orders over $500+ - T&Cs apply

Outdoor Accessories & Garden Decor

UV-stable outdoor cushions, weatherproof furniture covers and outdoor accessories for completing your alfresco setup. Outdoor cushions are manufactured from solution-dyed acrylic or UV-resistant olefin fabrics — colourfast, water-resistant and mildew-resistant under sustained Australian UV and rain exposure. Furniture covers protect tables, chairs, lounges and dining sets from seasonal weather and keep surfaces clean between use. Range also includes side tables, cleaning products and accessories suited to aluminium, teak and resin outdoor furniture materials. All accessories stocked are specified for permanent outdoor use — UV-resistant and weatherproof, not indoor products repurposed for outside positions. Australian-owned and operating since 2010. 2 showrooms — Campbelltown NSW and West Melbourne VIC.
Set Descending Direction
View as Grid List

Items 26-31 of 31

Page
per page
  1. Nardi Eden Outdoor Acrylic Sun Lounge Cushion

    $189.00
    Add to Wish List
  2. Nardi Folio Outdoor Chair Cushion

    $210.00
    Add to Wish List
  3. Nardi Net Outdoor Chair Cushion

    $49.00
    Add to Wish List
  4. Ambition Sunbrella Outdoor Cushion

    Special Price $29.50
    Add to Wish List
Set Descending Direction
View as Grid List

Items 26-31 of 31

Page
per page

Outdoor Accessories - FAQs

  1. What kind of products are in the Outdoor Accessories range?
    The range covers the smaller pieces that finish an outdoor setting rather than the furniture itself: seat and bench cushions cut to fit specific chairs and loungers, clip on parasols for sun loungers, tailored furniture covers in several sizes, and freestanding resin screens such as the Komodo EcoWall and Sipario partition walls that add privacy or a planter trough to a courtyard or balcony. Most items are made to fit a named Nardi or Pebl piece rather than sold as generic one size fits all accessories, so checking the product title against the furniture you already own matters more here than in most categories.
  2. Are the seat cushions made to fit a specific chair?
    Yes, most of them. The Nardi Net Chair Cushion is cut to fit the Nardi Net Chair specifically, and the Folio Outdoor Chair Cushion is shaped to fit the Nardi Folio reclining armchair rather than a generic seat. Buying the cushion named for your exact chair model is what keeps it sitting flush on the frame instead of slipping or hanging over the edge. If you are not certain which chair you have, check the model name on the original furniture listing or contact us before ordering, since a close size is not the same as a matched fit.
  3. What fabric are the outdoor cushions made from?
    It varies by cushion. The Nardi Net Chair Cushion uses a washable, fade-resistant outdoor fabric available in nine colourways. The Rettangolare bolster cushion is filled with polyester fibre and is offered in Sunbrella fabric or Nardi's own acrylic, depending on the colour chosen. Sunbrella and acrylic outdoor fabrics are both chosen for the same reason across the range: they resist fading and moisture better than an indoor fabric would, and most covers are removable for washing rather than needing dry cleaning or replacement.
  4. How is the clip on parasol for sun loungers attached?
    It clips directly onto the head end of the sun lounger frame rather than needing its own stand or base. Once fitted it sits over the headrest to shade the face and shoulders of whoever is lying down, and it is made to fit the Nardi Alfa, Omega, Eden and Tropico sun loungers specifically. The frame is UV treated polypropylene and the shade itself is a breathable synthetic fabric, so it holds its shape and colour under sun exposure rather than a lightweight fabric that would sag or fade quickly.
  5. What size is the Nardi Net Chair Cushion?
    It measures 48.5cm wide by 46.5cm deep, with a thickness of 3.5cm, and it is cut specifically to sit on the Nardi Net Chair without slipping or overhanging the frame. That thickness is enough to soften the perforated resin seat for longer sitting without changing the seat height noticeably. The cover is removable and washable, so the cushion can be taken off for cleaning between uses rather than needing to be sponged in place, and it is offered in nine different colourways to match different chair finishes.
  6. What is the Nardi Komodo EcoWall used for?
    It is a modular resin screen designed by Raffaello Galiotto for the Komodo furniture system, built to add privacy and shelter around a lounge setting rather than as a decorative extra. It carries a built in planter trough, so it can double as a small garden bed along the top edge, and the panels stack up to three modules high to build a taller screen where more privacy is needed. It clips directly to Komodo modules to divide or enclose a seating area, sharing the same interlaced resin weave used across the rest of the Komodo collection.
  7. What is the Nardi Sipario partition screen made from?
    The Sipario screens are moulded from regenerated, recycled fibreglass reinforced resin rather than virgin plastic or timber, as part of Nardi's Regeneration line. The Sipario 3 is a freestanding three-module lattice partition screen with a built in planter trough, standing over two metres tall for genuine privacy along a boundary or around a pool pump or bin area. Because it is freestanding rather than fixed to a wall or post, it can be moved as a courtyard or garden layout changes, without any permanent building work.
  8. Which furniture cover size do I need for stacked chairs?
    It depends on how many chairs or which pieces you are covering. The Nardi Small Outdoor Furniture Cover is sized to fit four to six stacked chairs or one Komodo module, while the Nardi Large cover steps up to two Komodo modules or a 140cm dining table. Each cover is supplied in a dark neutral smoke grey with webbing straps that hold it in place through wind and weather, rather than a loose sheet that can blow off. Match the cover to the specific furniture count listed in its title rather than guessing by eye.
  9. Are the furniture covers waterproof?
    The Nardi covers in this range are described as tailored and water-resistant rather than fully waterproof, and they are built to keep rain, dust, leaves and UV off furniture between uses rather than to survive being left on permanently in every condition. Slipping a cover on when the setting is not in use is described as materially extending the life of the furniture underneath. Covers should only be fitted once the furniture is clean and dry, since sealing moisture in against a damp cushion or frame causes more harm than leaving it uncovered.
  10. How do I clean the outdoor cushions in this range?
    Sponge the fabric with water and a mild detergent, then let it dry fully in the shade before putting it back on the chair or storing it. Avoid harsh chemicals, bleach and abrasive pads on outdoor fabrics such as Sunbrella or Nardi acrylic, since they can strip the colour or the weather resistant coating. Covers on several of the cushions are removable, so they can be taken off and washed separately rather than cleaned in place. Storing cushions in the shade rather than direct sun also helps limit the slight colour variation that is natural with yarn dyed acrylic fabric.
  11. What is the difference between the Rettangolare and Passepartout cushions?
    They are two different bolster style cushions in the same Nardi range, sized differently rather than being the same product in different fabrics. The Rettangolare measures 50cm wide by 28.5cm deep and 13.5cm thick, described as a slimmer rectangular shape that works as a lumbar or back support. The Passepartout is a larger cushion at 50cm wide, 48cm deep and 16cm thick. Both use a polyester fibre filling and are offered in either Sunbrella fabric or Nardi's own acrylic depending on the colourway chosen, so check the exact dimensions against the seat you are cushioning.
  12. Are these accessories made by Nardi in Italy?
    Many of them are. Nardi branded pieces in this range, including the Net Chair Cushion and the clip on parasols, are manufactured by Nardi in Italy, a company the product copy notes has been producing outdoor furniture since 1966. The Komodo and Sipario resin screens are also part of Nardi's own collections, with the Sipario range specifically moulded from regenerated recycled resin as part of its Regeneration line. Some covers and cushions in the accessories range are sold under other names rather than the Nardi brand, so check the product title if brand origin matters to your purchase.

Outdoor Furniture Ideas

Outdoor Accessories

Outdoor cushions, furniture covers and accessories

UV-stable cushion fabrics, weatherproof furniture covers and cleaning products specified for permanent Australian outdoor use. Australian-owned and operating since 2010.

UV Stable FabricsWeatherproof Materials2 Showrooms — Campbelltown & West Melbourne

Why Outdoor Furniture Ideas

✓ UV-stable fabrics rated for Australian conditions

✓ Weatherproof covers with vented, secure fit

✓ Trade pricing for hospitality and commercial venues

UV

Stable

All fabrics

All

Weatherproof

UV & rain resistant

2

Showrooms

Campbelltown & West Melbourne

AU

Owned

Australian business

Outdoor Cushion Guide, Fabrics, Sizing and Care

Outdoor cushions are categorised by their cover fabric: solution-dyed acrylic and UV-resistant olefin (polyolefin) are the two main outdoor-rated fabrics stocked for Australian conditions. Solution-dyed acrylic, used in the Nardi cushion range, incorporates colour into the fibre during manufacturing rather than surface-dyeing, making it colourfast and fade-resistant under sustained UV exposure. UV-resistant olefin is a lightweight synthetic with high UV stability and a fast-drying surface, well suited to high-use positions and humid or coastal environments.

Sizing outdoor cushions correctly depends on your furniture. For outdoor dining chairs, a seat pad 40 to 45cm square covers most standard seat depths. For outdoor lounges and sofas, match cushion depth to the seat, typically 50 to 60cm seat cushions and 80 to 100cm back cushions for most outdoor lounge configurations. For sun loungers, check whether the model accommodates a full-length lounger cushion (170 to 200cm) or two-part upper and lower cushion. Nardi cushions are designed exclusively for Nardi furniture models and are not compatible with other brands. Browse the Nardi cushion range or the full outdoor cushion range.

Outdoor Furniture Cover Guide, Sizing and Material Selection

Measure your outdoor furniture at its widest and deepest points, with chairs in the seated position around the table, and add 5 to 10cm clearance on each side. Cover drop (the depth from the top surface to the ground) should reach close to ground level on all sides for full weather protection. Common sizing: a 150 x 210cm rectangular cover for a 4-seat dining setting; 180 x 300cm for a 6 to 8 seat setting; 120 x 120cm square for a 2-seat lounge unit. When selecting between sizes, choose larger. A cover slightly oversized protects better than one that doesn't reach the furniture base.

Choose covers with built-in side vents to allow moisture to escape and prevent condensation accumulating under the cover. Secure tie-down straps or a drawstring hem prevent the cover lifting in wind, essential for coastal or elevated positions. Browse outdoor furniture covers and outdoor furniture cleaning products.

Visit Our Outdoor Furniture Showrooms

Outdoor Furniture Ideas operates two showrooms where you can view outdoor cushions, covers and accessories in person.