use code LOCKIT50 off orders over $500+ - T&Cs apply

New from Nardi: Tevere Lam Table & Doga Bench (2026)

New from Nardi: Tevere Lam Table & Doga Bench (2026)

INSPIRE  /  NEW ARRIVALS

Two New Pieces from Nardi Worth Planning For

The Tevere Lam 210 Ext. dining table and Doga Bench arrive in September 2026. Here's what they are and why they're worth getting in early on.

Outdoor Furniture Ideas  ·  4 min read

 
Nardi Doga Bench in fiberglass polypropylene, arriving at Outdoor Furniture Ideas September 2026

The Nardi Tevere Lam 210 Ext. and Doga Bench, arriving at Outdoor Furniture Ideas from September 2026.

Nardi doesn't add to its range often. So two new pieces arriving in September 2026 are worth paying attention to before they sell through. The Tevere Lam 210 Ext. is an extendable outdoor dining table built around a 10mm Solid Core HPL Materia laminate top and a coated aluminium base. The Doga Bench is a stackable, monobloc outdoor bench in nine colourways with UV stabilisers built into the material. Neither is live on the site yet, but both are available to enquire on now so you can get ahead of stock.

In This Article

  1. The Tevere Lam 210 Ext. — specs, materials, and who it's built for
  2. The Doga Bench — construction, colourways, and practical advantages
  3. How they work together as a complete outdoor dining set

No. 01

The Tevere Lam 210 Ext.

The Tevere Lam is an extendable outdoor dining table arriving in two sizes. The 147 Ext. goes from 147cm to 211cm wide (90cm deep) — the right scale for a covered alfresco that seats six to eight. The 210 Ext. goes from 211cm to 275.5cm wide (100cm deep), with room for ten or more when fully extended. Both sit at 76.5cm height, which works with standard outdoor dining chairs and most bench seating.

The top is 10mm Solid Core HPL Materia laminate. Solid Core HPL means the material runs all the way through rather than being a surface coating over a substrate. Chips, scratches, and heavy daily use don't expose a contrasting layer underneath. It's the same specification used across commercial hospitality settings where tables take real punishment year-round. Outdoor residential use is comparatively easy on it.

The base is coated aluminium with A2 stainless steel screws throughout and adjustable rubber feet. No iron, no rusting, no salt-air corrosion. Three colour combinations are available: Tortora, Antracite, and Corda. Each pairs the laminate top tone with a matching coated frame.

At 63.9kg this is not a table you move around. It goes into a covered alfresco, a courtyard, or under a pergola and stays there. One notable design detail: the extension maintains a linear, flush profile whether open or closed. There's no visible leaf gap or contrasting panel when the table is extended. It looks the same at 211cm as it does at 275.5cm.

Nardi Tevere Lam 210 Ext. outdoor dining table with Solid Core HPL Materia laminate top and coated aluminium base

The Tevere Lam's Solid Core HPL Materia top maintains a consistent flush profile at all extension widths.

No. 02

The Doga Bench

The Doga Bench is a monobloc outdoor bench: a single piece of fiberglass-reinforced polypropylene with aluminium tubes and non-slip rubber feet. No joints to work loose over time, no separate frame to corrode. It weighs 6.8kg, which means two people can move it without effort, and it stacks for storage.

The polypropylene is fiberglass-reinforced and UV-stabilised. The colour is consistent through the material, not applied as a surface finish. This is important in an Australian outdoor context. Cheaper painted resin furniture starts showing UV damage quickly: surface fading, chalking, hairline cracks in the coating. The Doga Bench is built so the colour you choose at purchase is still the colour you have in five or six years, with nothing more than a rinse-down in between.

Nine colourways are available: Tabacco, Cappuccino, Antracite, Bianco, Menta, Agave, Pera, and Marsala. The range spans neutral working tones through to accent options for spaces that want a colour moment. Several colourways align closely with the Tevere Lam finishes.

  • Width: 102.5cm — seats two adults comfortably, three where space allows
  • Seat height: 44cm — compatible with standard-height outdoor dining tables
  • Weight: 6.8kg — light enough to relocate or stack without tools
  • Stackable: Yes — practical for events, seasonal storage, or multipurpose spaces
Nardi Doga Bench in an outdoor setting showing UV-stabilised polypropylene construction and stackable design

The Doga Bench: UV-stabilised fiberglass polypropylene with aluminium tubes. Available in nine colourways from September 2026.

“Most outdoor bench seats rely on a surface coat for colour. The Doga Bench is UV-stabilised through the material itself, so there's nothing to fade from the surface down.”
 

TWO NEW ARRIVALS

Different pieces, same standard of build

The Tevere Lam and the Doga Bench aren't a designed set. They're two separate additions to the Nardi range that happen to land at the same time. The table is built for a permanent alfresco dining setup. The bench is built for flexibility: supplementary seating, a poolside perch, or a spot along the edge of an entertaining area that needs to stack away after the guests leave.

What they share is the construction logic. Aluminium and polypropylene don't rust, rot, or need seasonal maintenance. Neither piece will look noticeably worse after an Australian summer than it did going in. That's the reason Nardi is specified heavily in commercial hospitality settings: not because it's the cheapest option, but because the cost-per-year arithmetic works out over time. The same applies to residential outdoor furniture where you'd rather buy once and not revisit it.

SHOP OUTDOOR DINING

ARRIVING SEPTEMBER 2026

Get in first when these pieces land

The Tevere Lam 210 Ext. and Doga Bench aren't on the website yet. Email us now to register your interest and we'll confirm availability, pricing, and delivery details as soon as stock arrives.

ENQUIRE NOW